|
The main benefit of the Digital Antenna Yagi antenna is its ability to focus
its signal in one direction leading to the greater gain figures. This antenna is
designed for use on stationary objects such as buildings. If this antenna is not
correctly aimed, it will lose its effectiveness.
Using this antenna with a Digital Antenna Repeater Kit (such as the
DA4KSBR-50U Small Building
Repeater) will provide greater coverage on the 1900MHz PCS band however it
will also limit the repeater unit to only function on the 1900MHz band.
If using this antenna with the DA4KSBR-50U, the antenna will connect directly
to the cable included with the kit.
Features:
Requires:
- Cable: This antenna includes no cable
- Phone Adapter Cable:
A phone adapter cable in order to connect to your cell phone
Cable:
The antenna includes no cable. For a short run of 20' you can use our 20' RG-58 coax extension which has the appropriate connections for the Yagi. Please note that our other RG-58 cables can not be directly connected to the Yagi antenna.
For longer runs, we suggest using one of the below lengths of Ultra Low Loss 9913 Cable. This cable is fairly stiff so if you plan on connecting the Yagi directly to your phone with an antenna adapter we suggest you also include an 5' RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.
The primary difference between RG-58 and 9913 is the dB signal loss. RG-58 loses approximately 12dB/100' while 9913 loses about 4dB/100' (which is a big difference).
9913 Extensions Cables:
A phone adapter cable is required to connect to your phone.
Documents:
|
Specifications |
| Part Number |
419-YB |
| Frequency Range |
1850-1990MHz |
| Impedance |
50 Ohms |
| Antenna Gain |
14dBi |
| Beam Width |
H 31, V 31 Degrees |
| Maximum Power |
50 Watts |
| Radiation |
Directional |
| Connector |
N Female |
| Height |
4" |
| Width |
30" |
| Mount |
Pole w/U-Bolts |
|
